TRENDnet TV-IP762IC, User Manual

Page: 30 / 48

© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP762IC
28
Add User Account

Enter a Username for the new user, password and confirm the password. Click
Add to add the user.
User List
 This list populates as you add users. View the details from the drop-down list.
Select a user and then click the Delete button to erase the user.
Authentication

This tab consists of three authentication methods. RTSP (Real Time Streaming
Protocol) which stands for s an application-level protocol for control over the
delivery of data with real-time properties. RTSP provides an extensible
framework to enable controlled, on-demand delivery of real-time data, such as
audio and video. HTTP Authentication allows for browser access. You can use
the browser to view the camera. Snapshot URL Authentication is needed to
take a snapshot of the camera’s video. This authentication is essential for
photo capture using the TV-IP762IC. Click Save to set the protocols.
Device Settings

Change the Camera name and setup an OSD ID here. OSD is On-Screen Display.
As the name suggests it displays information on screen. This records data for
time and date capture. The LED light can also be configured to “OFF”,
Power/Link or Flicker. This means, it can be turned off, it can blink when there
is power or a network link or it can flicker for the same settings.
System – Time and Date
Time Configuration

Set the Time Zone from the drop-down list. Choose the region you are located
in. Enable Daylight Savings time if needed or set the DST manually.
Automatic Time Configuration

Use the checkbox to enable synchronization with an NTP server. To do this you
need the NTP server IP address. Two options are available, manual setup or Set
NTP server from the DHCP router/server.