© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP562WI
43
Recording
This camera allows users to record video, based on a trigger event, and then save the
video recording either on a micro SD card or on a Samba server shared folder. In the
Recording section, we can configure the following.
Tick the Enable option to enable the recording feature. Select the Trigger by option
from the drop-down list. Options to choose from are Motion, Schedule, Always, and
Sound. The parameters available for configuration will change depending on the
selections made.
After selecting the Motion option as the Trigger by event, the following can be
configured.
Selecting Motion, will tell the camera only to record when motion is detected. Tick the
Schedule option to only record motion at specific times of the week. Tick the Day and
enter the Start and End times.
After selecting the Schedule option as the Trigger by event, the following can be
configured.
Selecting Schedule, will tell the camera to record always within the scope of the
schedule configured. Tick the Day and enter the Start and End times.
After selecting the Always option as the Trigger by event, the following can be
configured.
Selecting Always, will tell the camera to record always.
Summary of Contents for TV-IP562WI
Page 69: ......