© Copyright 2017 TRENDnet. All Rights Reserved.
42
TRENDnet User’s Guide
TV‐IP440PI
Upload Snapshot:
Check this box to send snapshots to an FTP server or
configured Network Storage when motion is
detected. Go to Network Storage or FTP to setup
server information
Network Storage
Check this box to send video clip to network storage
when motion is detected. Go to
Storage
>
Network
Storage
to setup Storage server information
Click
Save
to save the changes
Video Tamper
This is to detect if the camera has been tampered with and surveillance is compromised.
You can set up tamper proof notifications to alert the system manager to check the
camera.
Tamper‐proof
Enable Tamper Detection:
Check this box to enable tamper detection. Click
Save
to save the settings.
Draw Area:
Click
Draw Area
button to start drawing. Click and
drag on the area you want to set up the tamper
detection. You can setup only one area for tamper
detection. Click Stop Drawing to stop drawing motion
detection areas. The gray block represent the
detection area.
Sensitivity:
Move the slider to adjust detection sensitivity.
Clear All:
Click this button to clear all the set up areas.
Enable Tamper Detection:
Check this box to enable tamper detection. Click
Save
to save the settings.