TRENDnet TV-IP420P Quick Installation Manual Download Page 11

Certifications

This device complies with Part 15 of the FCC Rules. 
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received. 
Including interference that may cause undesired operation. 

TRENDnet

20675 Manhattan Place
Torrance, CA 90501
USA

Applies to PoE Products Only: This product is to be connected 
only to PoE networks without routing to the outside plant. 

Note

The  Manufacturer  is  not  responsible  for  any  radio  or  TV 
interference  caused  by  unauthorized  modifications  to  this 
equipment. Such modifications could void the user’s authority 
to operate the equipment. 

Advertencia

En  todos  nuestros  equipos  se  mencionan  claramente  las 
caracteristicas del adaptador de alimentacón necesario para 
su  funcionamiento.  El  uso  de  un  adaptador  distinto  al 
mencionado puede producir daños fisicos y/o daños al equipo 
conectado.  El  adaptador  de  alimentación  debe  operar  con 
voltaje y frecuencia de la energia electrica domiciliaria exitente 
en el pais o zona de instalación.

Product Warranty Registration

Please take a moment to register your 
product online. Go to TRENDnet’s website at: 

www.trendnet.com/register

Technical Support

If you have any questions regarding the product 
installation, please contact our Technical Support.
Toll free US/Canada: 

1-866-845-3673

Regional phone numbers available
at www.trendnet.com/support

Waste electrical an electronic products must not be 
disposed of with household waste. Please recycle 
where facilities exist. Check with your Local 
Authority or Retailer for recycling advice.

TV-IP420P (V1) / 01.25.2017

Copyright © 2017. All Rights Reserved. TRENDnet.

Summary of Contents for TV-IP420P












Reviews: