15.
Disconnect the RJ-45 cable and
unplug the power. Then plug the
power back in (TV-IP410W).
English
7
14.
Click
Site Survey
. Select your
wireless network. If encryption
is enabled, select the proper
Authentication
type, enter the
Pre-Shared Key and then click
apply. (Example shows
WPA2-PSK. If your wireless
network does not support WPA,
select open or shared instead.
Contact your network
administrator for more
information) (TV-IP410W only).
Note:
The TV-IP410W will not work wirelessly until you disconnect the Ethernet
cable from the back of the camera.
13.
Click
Setup
,
Network
and then
click
Wireless
. (TV-IP410W only).