TRENDnet TV-IP400W - Wireless Advanced Pan, User Manual, Page: 34 / 112

33
in this box (it displays default initially). This default
setting will let the camera connect to ANY access
point under the infrastructure network mode.
To connect the camera to a specific access point on the
network, please make sure to set the SSID of the
camera to correspond with the access point’s SSID for
communication. Type any string up to 32 characters
long (spaces, symbols, and punctuation are not
allowed) in the Network Name box.
To connect the camera to an Ad-Hoc wireless
workgroup, make sure to set the same wireless channel
and SSID to match with the PC/Notebook’s
configuration for direct wireless communication.
z
Wireless Channel: This pull-down menu provides
the wireless channel for communication. A
"channel" is a range of frequencies to be used in
communication between the camera and access point
in Infrastructure mode, or the camera and
PC/Notebook in Ad-Hoc mode. Select the
appropriate channel from the list provided depending
on the regulatory region where the unit is sold. The
default setting is at channel
11 .
z
Transmission Rate: Select the data transmit rate
from this pull-down menu. The default setting is
Fully Automatic .
- WEP Encryption
z
WEP Encryption: Wireless network
communications can be intercepted easily. WEP
(Wired Equivalent Privacy) is an encryption method
specified by the IEEE 802.11g standard to make any
intercepted communications extremely difficult to