7
Note:
For tips on capturing appropriate camera viewing angle, please refer to the
User's Guide.
Mounting the camera
1
. Loosen the adjustable nut and remove the cover.
2
. Manually position the camera as desired.
Ceiling Mounting
Hole
Hole
Hole
3
. Place the provided template label on the mounting surface.
5
. You can run your cable from back of the camera, or route it through the side
of the base. Skip to step 7 if you are doing so.
4
. Drill holes for the provided screw anchors at each marked position on the
template. Make sure the drill bit matches the size of the provided screw
anchors.
6
. Drill a hole in the wall for the cables and then pass the camera's cables
through the hole.
7
. Connect the network cable to the camera. Ensure the camera is not powered.
8
. Insert the provided screw anchors into the holes.