TRENDnet User’s Guide
TV‐IP323PI
© Copyright 2018 TRENDnet. All Rights Reserved.
44
2.
Select
All Day
or
Customized
schedule of the
day.
3.
Set the time period and the event you want
to trigger the video recording
continuous
(always recording) or
motion detection
.
4.
Click
Select All
or
the weekday you want to
have the same schedule on different day.
5.
Click another day of the week by clicking on
its tab to set the next schedule. Click
OK
when you have finished your settings.
Click
Save
to save the changes
Video Tampering
This is to detect if the camera has been tampered with and surveillance is
compromised. You can set up tamper proof notifications to alert the system
manager to check the camera
.
Normal Linkage / Network Storage
Send Email:
Check this box to send an e‐mail notification when
motion is detected.
Upload to
FTP/Memory
Card:
Check this box to send snapshots to an FTP server
or the installed SD card when motion is detected.
Network
Storage:
You may select your configured network storage
drives can be found here.
Enable
Tamper
Detection:
Check this box to enable tamper detection. Click
Save
to save the settings.
Draw Area:
Click
Draw Area
button to start drawing. Click and drag
on the area you want to set up the tamper detection.
You can setup only one area for tamper detection.
Click
Stop Drawing
to stop drawing motion detection
areas. The gray block represents the detection area.
Sensitivity:
Move the slider to adjust detection sensitivity.
Clear All:
Click this button to clear all the set up areas.