12
Mounting the camera
2
. Place the provided template label on the wall or ceiling.
Note
: For tips on capturing appropriate camera viewing angle, please refer to the User's Guide.
3
. Drill holes for the provided screw anchors at each marked position on the template. Make sure
the drill bit matches the size of the provided screw anchors.
4
. If the camera wire will be installed through the base plate of the unit, skip to step 6. If the wiring
will be routed through the wall, drill a hole for the cable.
5
. Pass the camera's cables through the hole.
6
. Connect the network cable to the camera. Ensure the camera is not powered.
7
. Insert the provided screw anchors into the pilot holes.
1
2
2
2
2
1
1
1
Drill Template
1
. Loosen the locking bolts and manually position the camera as desired .