TRENDnet TV-IP201P User Manual Download Page 53

Page: 53 / 113

Update Firmware

This

option allows you to update the firmware of the camera once

you obtained a latest version of firmware. Click

Browse

to find

the firmware file saved in your computer, and then click

Update

NOTE: It will take a few minutes to update firmware. Please wait to
complete the procedure; you can then reboot the camera.

Once the configuration is completed, click

Home

to return to the

Welcome screen and select the desired View Video option either
through

ActiveX Mode

Java Mode

as described in the next

section.

Position the camera to the desired location appropriately for your
purpose. Then adjust the camera focus by manually turning the
lens clockwise or counter-clockwise. Please refer to

Appendix E

for detailed instruction.

View Image – ActiveX Mode

To view video images from the browser, click

View Image -

ActiveX Mode

from the Welcome screen to access the video

images from Internet Explorer as illustrated below:

Summary of Contents for TV-IP201P


















































































































Search results

Summary of Contents for TV-IP201P

Reviews:

TRENDnet TV-IP201P, User Manual, Page: 53 / 113

Search results

Summary of Contents for TV-IP201P

Reviews: