TRENDnet TV-IP121W User Manual Download Page 63

Page: 63 / 98

- 62 -

ALL RECORD:

Click to start recording video clips using

ALL connected cameras. To stop recording, please click

Record button

to stop the individual camera. Please

note: stop recording only stops the manual recording
camera. For Schedule recording, please change the
setting on configuration.

TIP

By default, the ID and Password boxes are “blank.” Click

Setting

Account

to change the ID and Password of the

lock/unlock function.



VIEW SELECTION Panel

View mode buttons:

SecurView™ provides multiple view

modes, including 1/4/9/16 windows and Full screen mode.

Scan:

When multiple cameras connected, click this button

to display the video views between cameras. Click the
Scan button again to stop scanning.

PREV:

When multiple cameras connected, click this

button to

switch the video view to the previous camera.

Summary of Contents for TV-IP121W



































































































Search results

Summary of Contents for TV-IP121W

Reviews:

TRENDnet TV-IP121W, User Manual, Page: 63 / 98

Search results

Summary of Contents for TV-IP121W

Reviews: