TRENDnet TV-IP121W, Quick Installation Manual, Page: 9 / 15

14. Disconnect the RJ-45 cable and
unplug the power. Then plug the
power back in.
English
7
13. Click Site Survey . Select your
wireless network. If encryption
is enabled, select the proper
Authentication type, enter the
Pre-Shared Key and then click
Apply . (Example shows
WPA2-PSK. If your wireless
network does not support WPA,
select open or shared instead.
Contact your network
administrator for more
Note: The TV-IP121W will not work wirelessly until you disconnect the Ethernet
cable from the back of the camera.
12. Click Setup , Network and then
click Wireless .