6
16.
Disconnect the RJ-45 Network cable and
unplug the power. Then plug the power back in.
17.
Verify the Power and Link LEDs are on.
Note:
The TV-IP110WN will not work wirelessly until you disconnect the network cable from
the back of the camera.
Configuration is complete
Register Your Product
To ensure the highest level of customer service and support, please take a moment to
register your product Online at:
www.trendnet.com/registe
r
Thank you for choosing TRENDnet
For detailed information regarding the
’s
configuration and advanced settings,
please refer to the Troubleshooting section, User's Guide CD-ROM, or TRENDnet's website
at http://www.trendnet.com.
TV-IP110WN
15.
Click Site Survey. Select an ESSID. The
ESSID is the wireless network name for your
wireless network (e.g. wireless router or
access point). If encryption is enabled, select
the proper Authentication and Encryption type,
enter the Pre-Shared Key and then click
Apply. (Example shows WPA2-PSK. If your
wireless network does not support WPA,
select open or shared instead. Contact your
network administrator for more information).
18.
Click Live View. Live video will now appear.