92
Wireless Internet Camera must be set from a workstation on the
same subnet.
A3:
Other possible problems might be due to the network cable.
Try replacing your network cable. Test the network interface of
the product by connecting a local computer to the unit, utilizing a
standard Crossover (hub to hub) Cable. If the problem is not
solved the Wireless Internet Camera might be faulty.
Q:
Why does the Power LED not light up constantly?
A:
The power supply used might be at fault. Confirm that you
are using the provided power supply DC 5V for the Wireless
Internet Camera and verify that the power supply is well
connected.
Q:
Why does the Link LED not light up properly?
A1:
There might be a problem with the network cable. To
confirm that the cables are working, PING the address of a know
device on the network. If the cabling is OK and your network is
reachable, you should receive a reply similar to the following
(…bytes = 32 time = 2 ms).
A2:
The network device utilized by the Wireless Internet Camera
is not functioning properly such as hubs or switches. Confirm the
power for the devices are well connected and functioning.
A3:
The wireless connection might be at fault. In ad-hoc mode
make sure the Wireless Internet Camera wireless channel and
ESS-ID is set to match the PC/Notebook wireless channel and
ESS-ID for direct communication.
93
Under infrastructure mode make sure the ESS-ID on the
PC/Notebook and the Wireless Internet Camera must match with
the Access Point’s ESS-ID.
Q:
Why does the Wireless Internet Camera work locally but not
externally?
A1:
Might be caused from the firewall protection. Need to check
the Internet firewall with your system administrator.
A2:
The default router setting might be a possible reason. Need
to double check if the configuration of the default router settings
is required.
Q:
Why does a series of broad vertical white line appears
through out the image?
A:
A likely issue is that the CMOS sensor becomes overloaded
when the light source is too bright such as direct exposure to
sunlight or halogen light. You need to reposition the Wireless
Internet Camera into a more shaded area immediately as this will
damage the CMOS sensor.
Q:
Noisy images occur how can I solve the problem?
A1:
The video images might be noisy if the Wireless Internet
Camera is used is a very low light environment. To solve this
issue you need more lighting.
A2:
There might be wireless transmission interference make sure
there are no other wireless devices on the network that will affect
the wireless transmission.