© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TU3-HDMI
12
In Extended Mode, the HD monitor or TV has a black border around the desktop.
This occurs when the screen resolution used by the HD monitor or TV is higher. To
resolve this issue, configure the HD monitor or TV to use the same resolution as the
primary computer display.
No playback on screen when attempting to play protected media files.
Some protected videos cannot be played back when connecting to an HDMI
® TV or
monitor.
Full screen menus may not display correctly or lose quality.
This may occur when the computer does not have enough memory to render the
screen in full quality.
This may also occur when using the
Optimize for Video
option in the adapter task tray
utility. You can try the following resolve the issue.
o
Disable the
Optimize for Video
option.
o
Close any unnecessary programs, especially applications that are CPU
intensive.
o
If using a laptop, set the computer power plan/options to High
Performance (or highest available power plan) to ensure the computer
does not go into a low power or power saving mode.
Only the first adapter can be configured to extend mode and the other adapters are
forced to mirror mode.
This may occur if the computer does not meet the minimum system requirements or
there is too much CPU utilization used by other applications which will limit the usage
capabilities of the adapters. Please ensure your computer meets the minimum system
requirements according to the number of adapters you are using and make sure that all
applications that require a lot of CPU utilization are closed.
Appendix
Hardware acceleration may not be available for the following applications.
Interface
Windows
®
XP
Windows Vista
®
/ Windows
®
7/ Windows
®
8
DX10
No
Yes, if the supported by the primary graphic card.
DX9
No
Yes, but full screen mode is not available. It displays
only in windowed mode.
DxVA
No
Yes, if supported by the primary graphics card.
Direct3D
No
Yes, but not available when docking station is set as
primary display.
DirectDraw Yes
Yes
OpenGL
No
Yes, but full screen mode is not available. It displays
only in windowed mode.
Windows®Display Mode Shortcut Keys for Windows® 7/8
On your keyboard, you simultaneously press <
(
Windows® Key
) +
P
> to toggle
between display modes. While still holding
(
Windows® Key
) , you can continue to
keep pressing
“P”
to switch between the display modes. When the mode is selected on
the toggle window, release both keys to select it.
Computer Only –
Display only on your computer and not the HD monitor or TV.
Duplicate (Mirror Mode) -
Mirrors your computer display on to the HD monitor or TV.
Extend -
Extends your computer desktop display on to the HD monitor or TV.
Projector only
- Assigns the HD monitor or TV to be the primary display and disables
your computer display.
Summary of Contents for TU3-HDMI
Page 1: ...TRENDnet User s Guide Cover Page ...
Page 18: ......