2
TRENDnet powerline adapters connect automatically out of the box. No additional Powerline
installation steps are necessary. To change the default Powerline encryption key (recommended) or
connect the adapters to an existing network that is using a different encryption key, please follow
the sync button procedure below.
If you are connecting the adapters to a non-TRENDnet Powerline device, please refer to the
manufacturer's documentation for the appropriate sync button procedure.
It is recommended to plug the adapters into nearby outlets before installing the devices to the
desired locations.
2. Connect Powerline Adapters
Important Note:
1
2
Push Sync button
for 3 seconds,
then release.
PWR (Power)
LED will blink.
Internet
Powerline adapter
(not included)
Push Sync button
for 3 seconds,
then release. PL
(Power Line) LED
will blink.
3
PL (Power
Line) LED
will turn
solid when
connected.
(may take
over one
minute).
3
TPL-410AP
PL (Power
Line) LED
will turn
solid when
connected.
(may take
over one
minute).
Router
