Specifications
Standards
• IEEE 802.3
• IEEE 802.3u
• IEEE 802.3x
• IEEE 802.3af
• IEEE 802.3at
Device Interface
• 1 x 10/100Mbps PoE+ port
• Sync button
• Reset button
• LED indicators
Frequency Band
• 2 – 28MHz
Modulation/Protocol
• OFDM, 4096/1024/256/64/16/8-QAM, QPSK, BPSK,
ROBO
• CSMA/CA, TDMA, CSMA
Data PHY Rate
• Up to 200Mbps
Networking Distance
• Powerline: Up to 300m (980ft.) linear distance over
electrical power lines***
Encryption
• 128-Bit AES (Advanced Encryption Standard)
Powerline Nodes
• Up to 8 (max.)
• Overlapping Powerline Networks
• Up to 4 (per electrical system)
Special Features
• Auto-connects to other TRENDnet Powerline adapters
• IPv6 support
• IGMP / MLDv2 Streams
Power
• Input: 100 - 240V AC, 50-60Hz
• Consumption: Active mode: 2.3W (max.); Standby
mode: 1.7W (max.)
• PoE Budget: 30 Watts (max.)
Operating
Temperature
• 0 – 55°C (32 – 131°F)
Operating Humidity
• Max. 93 % non-condensing
Certifications
• FCC
• IC
Dimensions
• 156 x 67 x 43 mm (6.14 x 2.6 x 1.7 in.)
Weight
• 205g (7.2 oz.)
Warranty:
• 3 year
Updated: 1/17/2018
TPL-331EP2K
20675 Manhattan Place • Torrance • CA 90501 • USA • T: 1-888-326-6061 • F: 1-310-961-5511 • [email protected] • www.TRENDnet.com
TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet products and is subject to change at any time, without notice. For the most
recent product information please visit http://www.trendnet.com. Copyright © TRENDnet. All Rights Reserved.
PACKAGE CONTENTS
• 2 x TPL-331EP
• Quick Installation Guide
• 2 x Network cable (1.2m/4 ft.)
* Maximum of 8 adapters (nodes) recommended for streaming video across your network.
** 200 Mbps is the maximum theoretical Powerline data rate when connected to another Powerline device. Data throughput may vary by circuit wire conditions.
*** Powerline communication works on a single electrical system. (Usually controlled by a single distribution panel). Power strip, GFCI outlets, and AFCI circuit breakers may
degrade Powerline network signals.
