2
3. Hardware Installation
Note
: The maximum amount of power available is 30 Watts per port and 246 Watts total. If a power
overload has occurred, the Switch will prioritize the distribution of power by port (from lowest to highest).
That is, port 1 will receive the highest priority and port 4 will receive the lowest priority. The ports with lower
priority will have their PoE function disabled until sufficient power becomes available.
1
. Plug the power cord into the
power adapter
. Connect the
power adapter
to the TPE-TG160g and then
to a power outlet.
2
. Connect an RJ-45 network cable from the TPE-TG160g to your computer's network port.
3
. Connect an RJ-45 cable from a port on the TPE-TG160g to the
network
port of the PoE device
(e.g. TV-IP310PI).
4:
Verify the following LEDs are on:
Power
,
PoE Status
and
Link/ACT
.
1
2
3
PoE