TRENDnet TPE-3012LS, User Manual, Page: 80 / 187

© Copyright 2020 TRENDnet. All Rights Reserved.
TRE
NDnet User’s Guid e
TPE-3012LS / TPE-3018LS
76
7. Click OK .
Add MAC Addresses used in filtering
MAC Address Table > Filtering Address
1. Log into your switch managemen t page (see “ Access your switch management page ”
on page 11).
2. Click on MAC Address Table and click on Filtering Address .
3. To add a static MAC address to the list, click Add .
4. Review the settings below.
•
MAC Address – Enter the MAC address. (ex: aa:bb:cc:dd:ee:ff)
•
VLAN – Enter the VLAN ID that the static MAC address entry should be
assigned.
5. Click Apply .
6. In the top right, click Save to save the configuration settings to NV-RAM/startup
configuration.
7. Click OK .