TRENDnet TPE-3012LS, User Manual, Page: 78 / 187

© Copyright 2020 TRENDnet. All Rights Reserved.
TRE
NDnet User’s Guid e
TPE-3012LS / TPE-3018LS
74
•
Mode
o
Auto – This option will allow a connected device to be automatically
detected by OUI and automatically configure the port or ports as an
untagged member of the surveillance VLAN.
o
Manual
–
This option will require not automatically configure any
ports and the port must be configured in the Surveillance VLAN
manually under VLAN > VLAN Configuration.
6. Click Apply .
7. In the top right, click Save to save the configuration settings to NV-RAM/startup
configuration.
8. Click OK .
Configure Surveillance VLAN OUI settings
VLAN > Surveillance VLAN > Surveillance OUI
1. Log into your switch management page (see “ Access your switch management page ”
on page 11).
2. Click on VLAN , click on Surveillance VLAN , and click on Surveillance OUI .
3. To add a new OUI to the list, click Add .
5. Enter the device OUI in the fields provided and enter a description that helps you
identify the manufacturer’s OUI. Then click Apply to add the new OUI.
6. Click Apply .
7. In the top right, click Save to save the configuration settings to NV-RAM/startup
configuration.
8. Click OK .