© Copyright 2020 TRENDnet. All Rights Reserved.
TRE
NDnet User’s Guid
e
TPE-3012LS / TPE-3018LS
36
Address Type
Specify TFTP server address type
•
Hostname: Use domain name as server address
•
IPv4: Use IPv4 as server address
•
IPv6: Use IPv6 as server address
Server
Address
Specify TFTP server address address
Filename
File name saved on remote TFTP server
Reset switch to factory default
Tools > Reset
1. Log into your switch
management page (see “
Access your switch management page
on page 11).
2. In the top left menu, click on
Tools
and click on
Reset.
Note:
Clicking Restore Factory Default will reset all switch configuration settings to
factory defaults.
Reboot switch
Tools > Reboot
1. Log into your switch
management page (see “
Access your switch management page
on page 11).
2. In the top left menu, click on
Tools
and click on
Reboot.
Note:
Any configuration change that not been save to NV-RAM using the
button will be lost after a switch reboot.
Summary of Contents for TPE-3012LS
Page 1: ...TRENDnet User s Guide Cover Page...
Page 187: ......