TRENDnet TPE-3012LS, User Manual, Page: 33 / 187

© Copyright 2020 TRENDnet. All Rights Reserved.
TRE
NDnet User’s Guid e
TPE-3012LS / TPE-3018LS
29
Creating new ONVIF users in the ONVIF device
ONVIF > Device Authentication
After ONVIF compliant devices have been discovered and successfully authorized, you
create new ONVIF users to those devices if supported.
1. Log into your switch management page (see “ Access your switch management page ”
on page 11).
2. Click on ONVIF and click on Device Authentication .
3. For the ONVIF devices that have been successfully authorized, check the device in the
list and click Account .
4. Under the IP Camera List section below, a list of the current user accounts of the
ONVIF device will be listed. To create a new ONVIF user for the device, check the device
in the list and click
Add .
5. Scroll down to the Add User Account section and enter the new account user name
and password in the fields provided. For the User Level, select Operator or User.
Note: Please note that the ONVIF user password typically requires eight characters for
accounts.
6. After you have applied configuration changes, scroll to the bottom of the window and
click
Apply . A success message will appear if the configuration changes were
successfully applied.