© Copyright 2020 TRENDnet. All Rights Reserved.
TRE
NDnet User’s Guid
e
TPE-3012LS / TPE-3018LS
23
Password Settings
This section will allow users to change the admin password to log into the switch
management interface.
After you have completed configuration, click
Apply
and click
Save.
4. After completing your configuration changes, click
Apply
.
5. Click
Save
in the top left menu to save configuration to NV-RAM.
Mail Alert
Mail Alert
This section will allow users to configure email alert notification for PD alive check and
Ping Watchdog.
1. Log into your switch
management page (see “
Access your switch management page
on page 11).
2. Click on
Mail Alert
.
3. Review the settings below.
•
State:
Select
Enable
to enable the email notification/alerts.
•
SMTP Server:
Enter the SMTP server domain name or IP address.
Note:
Please make sure the switch IP address default gateway and DNS server
address settings are set correctly for domain name resolution.
•
SMTP Port:
Enter the SMTP port number used by the SMTP email server.
•
User Name:
Enter the user name or email account user name.
•
Password:
Enter the password for the email account.
•
State:
Select
Enable
to enable the email notification/alerts.
•
Sender:
Enter a sender email address.
•
Receiver:
Enter the receiving email address.
•
Alert Type:
Select the alert type to send notifications.
o
PD Alive:
If selecting this option, email notifications will be sent when
PD alive check is activated.
o
Ping Watchdog:
If selecting this option, email notifications will be sent
ping watchdog is activated.
•
Send Test:
Use this to verify your SMTP email configuration settings are
configured correctly and email notification is working properly.
Summary of Contents for TPE-3012LS
Page 1: ...TRENDnet User s Guide Cover Page...
Page 187: ......