© Copyright 2020 TRENDnet. All Rights Reserved.
TRE
NDnet User’s Guid
e
TPE-3012LS / TPE-3018LS
21
Surveillance Settings
Surveillance Settings
This section will allow users to configure switch settings such as switch IPv4 address
settings, DNS server settings, SNMPT host settings, syslog server, and admin password.
1. Log into your switch
management page (see “
Access your switch management page
on page 11).
2. Click on
Surveillance Settings
.
IP Settings
After you have completed configuration, click
Apply
and click
Save.
Note:
After changing IP address settings, you may need to log into the switch with the
new IP address settings. Please also make sure to click
Save
.
•
Address Type:
Select
Static
to manually specify your IP address settings or
Dynamic
to allow your switch to obtain IP address settings automatically from a
DHCP server on your network.
•
IP Address:
Enter the new switch IP address. (e.g.
192.168.200.200
)
•
Subnet Mask:
Enter the new switch subnet mask. (e.g.
255.255.255.0
)
•
Default Gateway:
Enter the default gateway IP address. (e.g. 192.168.200.1 or
typically your router/gateway to the Internet).
•
DNS Server 1:
Enter the primary IPv4 DNS server address.
•
DNS Server 2:
Enter the secondary IPv4 DNS server address.
SNMP Host Settings
After you have completed configuration, click
Add, Apply
, and click
Save.
Item
Description
Address Type
Notify recipients host address type.
Server Address
IP address or the hostname of the SNMP trap recipients.
Version
Specify SNMP notification version
•
SNMPv1: SNMP Version 1 notification.
•
SNMPv2: SNMP Version 2 notification.
•
SNMPv3: SNMP Version 3 notification.
Type
Notification Type
•
Trap: Send SNMP traps to the host.
•
Inform: Send SNMP informs to the host.(version 1 have
no inform)
Community/User
SNMP community/user name for notification. If version
is SNMPv3 the name is user name, else is community
name.
Security Level
SNMP notification packet security level, the security
level must less than or equal to the community/user
name
•
No Security: Specify that no packet authentication is
performed.
•
Authentication: Specify that no packet authentication
without encryption is performed.
•
Authentication and Privacy: Specify that no packet
authentication with encryption is performed.
Summary of Contents for TPE-3012LS
Page 1: ...TRENDnet User s Guide Cover Page...
Page 187: ......