TRENDnet TPE-3012LS, User Manual, Page: 147 / 187

© Copyright 2020 TRENDnet. All Rights Reserved.
TRE
NDnet User’s Guid e
TPE-3012LS / TPE-3018LS
143
Configure Remote Logging/Syslog Server
Diagnostics > Logging > Remote Server
1. Log into your switch management page (see “ Access your switch management page ”
on page 11).
2. Click on Diagnostics , click on Logging , and click on Remote Server.
3. Click Add and review the settings below.
Item Description
Server
Address The IP address of the remote logging server.
Server
Ports
The port number of the remote logging server.
Facility
The facility of the logging messages. It can be one of the
following values: local0,local1, local2, local3, local4, local5,
local6, and local7.
Severity
The minimum severity.
•
Emergence: System is not usable.
•
Alert: Immediate action is needed.
•
Critical: System is in the critical condition.
•
Error: System is in error condition
•
Warning: System warning has occurred
•
Notice: System is functioning properly, but a system notice
has occurred.
•
Informational: Device information.
•
Debug: Provides detailed information about an event.
4. Click Apply .
5. In the top right, click Save to save the configuration settings to NV-RAM/startup
configuration.
6. Click OK .