TRENDnet TPE-3012LS, User Manual, Page: 129 / 187

© Copyright 2020 TRENDnet. All Rights Reserved.
TRE
NDnet User’s Guid e
TPE-3012LS / TPE-3018LS
125
Configure IP Source Guard IMPV Binding
Security > IP Source Guard > IMPV Binding
1. Log into your switch management page (see “ Access your switch management page ”
on page 11).
2. Click on Security, click on IP Source Guard, and click on IMPV Binding .
3. Click Add and review the settings below.
Item Description
Port Select port from list of a binding entry.
VLAN Specify a VLAN ID of a binding entry.
Binding
Select matching mode of binding entry
•
IP-MAC-Port-VLAN: packet must match IP
address
、
MAC address
、
Port and VLAN ID.
•
IP-Port-VLAN: packet must match IP address or
subnet
、
Port and VLAN ID.
MAC
Address Input MAC address. Only available on IP-MAC-
Port-VLAN mode.
IP Address
Input IP address and mask. Mask only available
on IP-MAC-Port mode.
4. Click Apply .
5. In the top right, click Save to save the configuration settings to NV-RAM/startup
configuration.
6. Click OK .