The Gigabit Power over Ethernet Injector (TPE-111GI) combines
electrical power with a Gigabit network data signal to product a
Gigabit Power over Ethernet (PoE) signal. Connect this device to a
non-PoE switch and then run a Gigabit PoE cable for up to 100
meters (328 Ft.) to network most PoE devices.
No need to buy a PoE switch—use existing open ports from a non-
PoE switch to network PoE devices. Save installation and
equipment cost when installing TRENDnet PoE access points and
IP cameras in remote locations. No need to install PoE devices near
a power outlet. This compact device safeguards valuable network
equipment with short circuit protection. Quickly create an integrated
PoE and non-PoE network at Gigabit speeds.
TPE-111GI
(V1.0R)
TEW-503PI (07-28-2005)
TPE-111GI
rev:03.10.2008
• Power Over Ethernet (PoE) Injector for 10/100/1000T deliver power up to 100 meters (328ft)
• Network devices at Gigabit speeds all within a compact device
• Easy install PoE devices where a power outlet is not available
• Reduce installation and network equipment costs
• Safeguards network devices with short circuit protection
• Plug and Play in remote location
• Light weight and compact size
• IEEE 802.3ab and 802.3af PoE compliant
• Supplies Power to PD up to 15.5 Watts
• 5-Year Warranty
FEATURES
Gigabit Power over Ethernet (PoE) Injector
