5
Command
Hot-Keys
Description
Front-Panel
Buttons
Quick Reference Sheet for TK-403K
Select PC Channel
Select Audio&Mic
Channel
(Joint-select PC port
& audio/mic, if binding
is enabled)
Previous PC channel
Bind PC & Audio/Mic
Switching
[Default]
Beep Sound On/Off
Next lower PC
channel
Autoscan
Autoscan with
Programmable
Delay Time
Console Mouse/
Keyboard Reset
Next higher PC
channel
Stop Autoscan
ScrLk
ScrLk
X
+
+
x = 1 ~ 4 for PC channel number
ScrLk
ScrLk
+
+
(Arrow up)
ScrLk
ScrLk
+
+
(Arrow down)
ScrLk
ScrLk
+
+
(Back Space)
ScrLk
ScrLk
+
+
B
ScrLk
ScrLk
+
+
S
ScrLk
ScrLk
+
+
End
Press any key on keyboard
Press the corresponding
front-panel button to select
the desired PC channel
Select the active Audio&Mic
channel
(Joint-select PC &
audio&mic channel, if binding
is enabled)
Select the active PC channel
Toggle between the previous
channel and current channel
Enable the binding of PC port
and audio&mic switching.
(Once this feature is enabled,
any pc and/or audio&mic
switching is bound together)
[Factory Default]
Toggle on/off the beep sound
for hotkey/channel switching
operation
Select the next lower PC
channel (Switch only to the
next lower channel with live
power input from PS/2
interface)
Autoscan through every
connected channel for quick
screen browsing of each
channel (scan delay = 5 sec.)
Autoscan with a user-defined
delay time within a range of
5 ~ 100 seconds
Reset mouse/keyboard on
the console side (This
hotkey command works only
for PnP OS such as
Windows 98 SE or later
Windows OS; for non-PnP \
OS,).
Select the next higher PC
channel (Switch only to the
next higher channel with live
power input from PS/2
interface)
Terminate Autoscan.
Press any button.
Button 1
(Press and hold down
for 2”)
Last Button
(Press and hold down
for 2”)
English
ScrLk
ScrLk
+
+
+
S
X
x = 0~9
1>10” ; 2>20” ; 3>30” ; 4>40” ; 5>50”
6>60” ; 7>70” ; 8 >80” ; 9>90” ; 0>100”
y = 1~4 for audio/mic channel number
ScrLk
ScrLk
+
+
Fy
ScrLk
ScrLk
+
+
Q
- - -
- - -
- - -
- - -
- - -
- - -
- - -