TRENDnet TIM-128, User Manual

Page: 47 / 53

- 46 -
13. Select “ COM# RVS ISDN Internet PPP #2 ” in RAS device list. Click
“ OK ”.
14. Click “ Continue ”. Then, re-start Windows NT.
15. Run RVS-COM “ CommCenter ”.
16. Double click “ Dial-Up Networking ” in “ My Computer ”.
17. If you are not new of using Dial-up Networking, click “
New
” command
button. If this is your first connection, just skip it. Give the new
connection name. For example, “
RVS_MP ”. Click “ Next ”.
18. Select “ Send my plain text password… ” (recommended). Click “ Next ”.
19. Select “RVS ISDN Internet PPP (COM#) ”. Click “ Next ”.
20. Give the phone number that you want to dial to. Click “ Next ”.
21. Click “ Finish ”.
22. Click “ More ” command button.
23. Select “
Edit entry and modem properties
”. Open “
Basic
” tab. Select
“ Multiple Lines ” in “ Dial using ” box.
24. Click “ Configure… ” command button. Enable (tick) “ RVS ISDN
25. Internet PPP #2… ).
26. Click “ Phone numbers… ”. Give the 2
nd
ISDN phone number for your
Multilink PPP connections, if any. If your ISP just support single phone
number for Multilink PPP connections, you must enter the number here.
Click “
Add ”. Click “ OK ” to complete the configuration.
Making “Modem over ISDN” Connections (Using CAPI software)
Using RVS-COM Softmodem
1. Run RVS-COM “ CommCenter ”.
2. Enter “ Softmodem ” tab. Enable “ Use Softmodem ”. Click “ Apply ” and
“ OK ”.
3. Open “
ISDN
” tab. Select appropriate ISDN voice encoding scheme for
your location. Generally “ A-law ” is for European countries, and “ Mu-
law ” for North America.
4. Run “ Config ” in “ Configuration Utility ”.