Note
:
1. After changing the DIP Switch settings, power cycle the Fiber Converter
2. LLR stands for Link Loss Return. When LLR is enabled, the fiber port's
transmitter shuts down if its receiver fails to detect a valid receive link. If one
of the optical conductors is bad, the Fiber converter with LLR enabled will
return a no link condition to its link partner. LLR is used to detect link
problems only on the fiber port. If LLR is enabled on one Fiber converter, the
opposite Fiber converter mus have LLR disabled
3. LEDs and DIP switches
2
1
Off
Off
Action
On
Function
TX Auto-Negotiation
On
Switch
TX Forced Mode
LLR Enable
LLR Disable
Dip Switches
4
Color
Green
Blinking
Sequence
Function
PWR
(Power)
LINK/
ACT
Green
Off
Green
Off
Solid
Device powered Off
Solid
Device powered On
2000Mbps (Full Duplex) Connection
(per port)
2000Mbps (Full Duplex) Data Transmitting/
Receiving (per port)
The link is disconnected
LED
n/a
n/a
LEDs
