manualshive.com logo in svg

TRENDnet TEW-P21G, User Manual, Page: 8 / 116

Share
Download
TRENDnet TEW-P21G User Manual Download Page 8

- 8 - 

General Features 

♦

 

Equipped with 1 parallel port and 2 USB ports allows user to share 
three printers on LAN simultaneously. 

♦

 

Compliant with USB 2.0 High-speed printing. 

♦

 

Equipped one 10/100 auto-MDIX Fast Ethernet LAN port. 

♦

 

Multi protocol support is ideal for shared printing in mixed-LAN 
environments. 

♦

 

Windows-based administrative program makes it possible to set up 
in a few steps. 

♦

 

Latest MIB-II (RFC 1213) for SNMP standard management. 

♦

 

Offer LPR program for Windows 95/98/Me TCP/IP printing. 

♦

 

IP assignment support for DHCP, BOOTP and RARP. 

♦

 

Support Web configuration. 

♦

 

Provide Flash memory for easy firmware upgrade. 

♦

 

Highly efficient design mechanism to provide unbeatable 
performance achieving data rate up to 54Mbps for 802.11g and 
11Mbps for 802.11b with wide range coverage. 

♦

 

Printing Access control and display. 

♦

 

E-mail notification for printer error messages. 

♦

 

Support E-Mail printing and FTP printing. 

♦

 

Ability to save print server configuration into hard drive for easy 
access and backup without the hassle to reconfigure if setting 
is altered. 

♦

 

Support IPP printing for Windows 2000/XP. 

♦

 

Support Microsoft Graphical Device Interface (GDI) Printer 

♦

 

Support second http port for remote web configuration and IPP 
printing. 

♦

 

Support UPnP (Universal Plug and Play) for Windows XP. 

♦

 

Support Mac OS 10.2 “Rendezvous” zero-configuration function. 

Summary of Contents for TEW-P21G





















































































































Reviews:

No comments