- 39 -
Configuration
J
Wireless
Wireless Interface
-
Connection Mode:
Select one of the three connection modes.
•
Infrastructure
(default)
-
Connects to compatibly configured
wireless AP or router in a WLAN.
•
Ad-Hoc -
Connect to compatibly configured wireless clients
in the peer-to-peer mode.
-
SSID:
Assign the SSID in this box. You can manually input the
name or select one from the pull-down menu. To search the
- 40 -
available wireless AP within the network, click the
Site Survey
button.
-
Wireless Channel:
Select the channel from the pull-down menu.
The default setting is
11
.
-
Transmission Rate:
Select the data transmit rate from the pull-
down menu. The default setting is
Fully Automatic
.
WEP Encryption
This field allows you to configure the settings of data encryption.
Please remember that the WEP key must be set before the data
encryption is enforced.
-
WEP Encryption:
This option allows you to select
Disable
,
64
bits
, and
128 bits
for the encryption setting.
-
WEP Key Format:
You can decide the network key to be
encoded by
ASCII
(ASCII characters) or
HEX
(hexadecimal
digitals).
Then, enter the key(s) for the network in the
Key
box (1~4).
Advanced Setting
This field allows you to configure more settings, including:
-
Beacon Interval:
Enter the number of beacon interval time in
millisecond.
-
Preamble:
This option allows you to set the length of preamble.
Setting options are:
Long
- it is set to 144 bits;
Short
- it is set to
72 bits.
-
Authentication Type:
You can set the authentication type by
selecting the settings:
Open System
,
Shared Key
, and
Both
.
TIP: Once you have changed the settings in each option, click
Save to store the settings, or Cancel to abandon.