Physical Installation
Connecting Print Server to the Network
:
1. Make sure the Print Server and Printer are powered OFF.
2. Connect the printer to the Print Server's printer port.
3.
For Wired Network
: Use a standard RJ-45 LAN cable to
connect the LAN port on the Print Server to a
10/100Base-TX network.
Note: When powering on the print server, if the LAN port is
not connected to a functioning network device, the LAN port
is disabled. To enable the LAN port, please power off the
print server, connect LAN port to a working network device
and then power on the print server.
4.
For Wireless Network
:
Note: For Wireless Only environment, do not connect RJ-45
LAN cable to the Print Server’s LAN port
.
•
Ad-Hoc Mode
(Peer-to-Peer): Please match the
SSID/Channel with your other wireless devices
•
Infrastructure Mode
: Please match the
SSID/Channel with the Access Point
Page
1
