Fix the L type clamp at the back of the feeder’s support pole with 4 M6 bolts, washers, and nuts.
Page 1: ...TEW OA24D Hardware Installation Guide Package Content 5 Feeder s Support pole 1 4x M5 bolts washers and nuts Stainless 4 Reflector 3 Clamps U Type L Type 6 Grids 2 4x M6 bolts washers and nuts Stainless ...
Page 2: ...ssemble the grids with M5 bolts washers and nuts Do not tighten the nuts at this moment 2 The illustration here shows horizontal polarization Most applications probably use vertical polarization which you would turn the feeder 90 degrees Vertical Polarization for most applications ...
Page 3: ...Fix the L type clamp at the back of the feeder s support pole with 4 M6 bolts washers and nuts ...
Page 4: ... SMA cable TEW 2000F TEW 8000F to connect to TRENDware Access Points Cards 7 Check V S W R to make sure the connection CAUTION 1 If you want to get a vertical polarization the L type clamp should be turned 90 degrees angle for the newer version antennas with the polarization arrow on the feeder you can simply turn the feeder 90 degrees for desire polarization 2 Change the position of one side of t...
