10
8. In the Edit Wireless Group window, enter the wireless network name/SSID for the wireless
network. (e.g. TRENDnet-WiFi)
Note
: The SSID is the wireless network name used to broadcast and be discovered by your
wireless client devices to connect to your wireless network.
9. For Roaming options, select
802.11k
and
OKC
wireless roaming protocols to ensure
fast transition wireless connectivity for client devices when roaming between multiple access
points.
10. For
Authentication method
, select
WPA/WPA2-PSK
. For the WPA Cipher, select
AES
and
enter the
Pre-Shared Key
required to connect to your wireless network. Click
OK
.
Note
: The pre-shared key is the key/password (8-63 alphanumeric characters) client devices
will be required to enter in order to connect to your wireless network.
11. The initial wireless settings are complete. You can use the included hardware to mount the
access points to the desired locations.
Note
: The access points must be connected to the same IP subnet as your wireless controller.
(e.g. 192.168.10.x / 255.255.255.0)
7. In the list below, click
Create
to create a new wireless profile.
Roaming
802.11k
802.11r
OKC
SSID
TRENDnet-WiFi
