TRENDnet TEW-691GR Manual Download Page 22 | Manualshive

Page: 22 / 56

TRENDnet TEW-691GR Manual Download Page 22

22

Operating Mode

Mixed Mode
Green Field

Mixed Mode:

In this mode packets are transmitted with a preamble compatible with the legacy

802.11a/g, the rest of the packet has a new format. In this mode the receiver shall be able to
decode both the Mixed Mode packets and legacy packets.

Green Field:

In this mode high throughput packets are transmitted without a legacy compatible

part.

Channel BandWidth:

Set channel width of wireless radio.

20
20/40

20 Channel Width = 20 MHz
20/40 Channel Width = 20/40 MHz

Guard Interval:

Support Short/Long GI, the purpose of the guard interval is to introduce immunity to
propagation delays, echoes and reflections, to which digital data is normally very sensitive.

Long
Auto

Long Guard Interval, 800 nsec
Short Guard Interval, 400 nsec

MCS:

Fix MCS rate for HT rate.

0-15

The Modulation and Coding Scheme (MCS) is a value that determines the modulation, coding
and number of spatial channels.

802.11

«
...
20
21
22
23
24
...
»

Summary of Contents for TEW-691GR

























































Reviews:

No comments