24
PBC Method
The PBC method requires the user to press a PBC button on both the Enrollee and the
Registrar within a two-minute interval called the Walk Time. If there is only one Registrar in
PBC mode, the PBC mode selected is obtained from ID 0x0004, and is found after a
complete scan. The Enrollee can then immediately begin running the Registration Protocol.
If the Enrollee discovers more than one Registrar in PBC mode, it MUST abort its connection
attempt at this scan and continue searching until the two-minute timeout.
*Before you press PBC on STA and candidate AP. Make sure all APs aren't PBC mode or
APs using PBC mode have left their Walk Time.
1. Select an AP (SSID/BSSID) that STA will join to and Select the "Push-button
Configuration" method.
2. Click PBC to start the PBC connection.
3. Push the PBC on AP.