21
Troubleshooting
Q1:
A1:
A2:
A3:
My Nintendo Wii does not have an Ethernet port. Can I use this with my Wii?
You will need to install a USB to Ethernet adapter on your Wii. The
TRENDnet TU2-ET100 version 3.0r is compatible with the Wii. Please go to
www.trendnet.com for more information regarding the TU2-ET100.
: My wireless router does not support Wi-Fi Protected Setup (WPS). What
should I do?
Please follow the instructions in section 2.2 Manual Setup if your wireless
router does not support WPS.
: I inserted the User's Guide CD-ROM into my computer's CD-ROM Drive to run
the Setup Wizard, but the installation menu does not appear automatically. What
should I do?
For Windows 2000/XP, if the installation menu does not appear automatically,
click
Start
, click
Run
, and type
D:\setup.exe
where "
D
" in "D:\setup.exe" is the
letter assigned to your CD-ROM Drive, and then press the ENTER key on your
keyboard. For Windows Vista, if the installation menu does not appear
automatically, click
Start
, click the
Start Search
box, and type
D:\setup.exe
where "
D
" in "D:\setup.exe" is the letter assigned to your CD-ROM Drive, and then
press the ENTER key on your keyboard.
I receive an unable to configure error when I go through the wizard. What
should I do?
First, double check that the wireless LED on the TEW-647GA and your
wireless router is lit. Second, power cycle the TEW-647GA and your wireless
router. Unplug the power to the TEW-647GA and your wireless router. Wait 15
seconds, then plug the power to your wireless router back in. Wait 15 seconds,
then plug the TEW-647GA back in. Then go through the wizard again. Third,
factory reset the TEW-647GA and go through the wizard again. To reset the
TEW-647GA, take a pin or paper clip and press the reset button for 15 seconds,
then let go.
Q2
Q3
Q4:
A4:
