manualshive.com logo in svg

TRENDnet TEW-631BRP, User Manual

Share
Download
TRENDnet TEW-631BRP User Manual Download Page 49

48 

Save  

Saves the new or edited Inbound Filter Rule in the following list. When finished updating 
the Inbound Filter Rules List, you must still click the 

Save Settings

 button at the top of the 

page to make the changes effective and permanent.   

Inbound Filter Rules List   

The section lists the current Inbound Filter Rules. An Inbound Filter Rule can be changed by 
clicking the Edit icon, or deleted by clicking the Delete icon. When you click the Edit icon, the 
item is highlighted, and the "Edit Inbound Filter Rule" section is activated for editing.   

In addition to the filters listed here, two predefined filters are available wherever inbound filters 
can be applied:   

Allow All   

Permit any WAN user to access the related capability.   

Deny All   

Prevent all WAN users from accessing the related capability. (LAN users are not affected 
by Inbound Filter Rules.)   

 

Summary of Contents for TEW-631BRP




































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands