7.
Insert the wires on the stripped end
of the cable into the RJ-45 plug.
Make sure the wires are inserted
into the RJ-45 plug based TIA/EIA
T-568A or T-568B standard.
8.
Crimp the stripped cable to the
RJ-45 plug.
9.
Insert the gasket to the front end of
the connector. Then put the screw
nut on the back.
10.
Connect the clamp ring and
seating nut to the
PoE
port on the
rear of the TEW-455APBO.
English
4