Locate the reset button on the back of the unit. Press and hold it in for approximately 15
seconds.
Q
: How do I save or reload the configuration of my Access Point?
A
: 1)
Open your web browser and type the IP address of the TEW-450APB in the
address bar. The default IP address is 192.168.1.1. At the login, enter your
username (admin) and password (admin).
2) Click on the Tools tab at the top of the page.
3) To save a configuration file click on the “Backup” button. The default file name is
config.bin.
To load a previously saved configuration file click on “Browse” next to Restore settings.
Locate and select the previously saved config.bin file and click on “Restore”.
Q
: How do I upgrade the firmware on my Access Point?
01/16/06
