English
3
3. How to Connect
In this example, the TEG-S3M8TX is used. Please use applicable cables (i.e.
fiber or copper) to connect the TEG-S3000i to your main network.
4.
Connect the network cable to the front of the
switch
and your PC.
3.
Connect the AC Power cord to the back of
the TEG-S3000i.
2.
Slowly slide the module in and push the
module all the way to end of the chassis. After
locking the module in place, tighten the thumb
screws.
1.
For 10/100Mbps modules, unscrew the face
plates in front of the TEG-S3000i. For Gigabit
modules, unscrew the face plate at the back of
TEG-S3000i.
5.
Turn on the TEG-S3000i.
6.
Verify that the
PWR
LED displays a solid
green light.
