12
Q1.
A1.
Q2.
A2.
How come I cannot see any light from any of my LED's?
Your TEG-S2600i Stackable SNMP Switch is not getting any power.
Make sure that your surge protector or your outlet is getting power and
make sure that the AC Power cord is properly connected to your
TEG-S2600i.
My current network card operates at 100Mbps. How can I upgrade my
workstation to 1000Mbps?
TRENDware provides Gigabit solutions to help you upgrade your
workstation. For PCs, we recommend using the TEG-PCITXR or the
TEG-PCITXM2. For notebooks, we recommend using the TEG-PCBUSR.
If you have any questions regarding the TEG-S2600i Stackable SNMP Switch
please contact Trendware Technical Support Department.
Troubleshooting
Certifications
This equipment has been tested and found to comply with FCC and CE Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received.
Including interference that may cause undesired operation.