TRENDnet TEG-S224TX, User Manual, Page: 16 / 23

10
Then, use screws provided with the equipment rack to mount the
Switch to the rack.
Figure 3. Installing t he Switch on an equipment rack
Connecting Network Cable
The Switch supports 10/100/1000Mbps Gigabit Ethernet. It runs
full/half duplex transfer mode for 10/100Mbps and full duplex
transfer mode for 1000Mbps.
These ports are Auto-MDIX type port. They can auto transform
to MDI-II or MDI-X type, so you can make a connection using a
standard or a crossover cable.
AC Power
The Switch can be used with AC power supply 100~240V AC,
50~60 Hz. The Switch does not come with a Power ON/OFF
switch, so the Switch will automatically power on when it is
connected to an electrical outlet. The Switch’s power supply will
adjust to the local power source automatically and may be turned
on without having any LAN segment cables connected.