TRENDnet TE100-S810Fi - Switch, User Manual

Page: 10 / 84

Console Port : Console management can be done through the
Console Port. It requires a direct connection between the Switch and
an end station ( PC ) via a RS-232 cable.
Desktop Installation
Set the switch on a sufficiently large flat space with a power outlet
nearby. The surface where you put your Switch should be clean,
smooth, level, and sturdy.
Make sure there is enough clearance around the Switch to allow
attachment of cables, power cord and air circulation.
Attaching Rubber Feet
A. Make sure mounting surface on the bottom of the Switch is grease
and dust free.
B. Remove adhesive backing from your Rubber Feet.
C. Apply the Rubber Feet to each corner on the bottom of the Switch.
These footpads can prevent the Switch from shock/vibration.
Figure 2-8. Attaching Rubber Feet to each corner on the bottom of the
Switch