TRENDnet TE100-S16V, User Manual, Page: 16 / 34

10
Connecting Network Cable
The Switch supports 10Mbps Ethernet or 100Mbps Fast Ethernet
and it runs both in half and full duplex mode.
These ports are Auto-MDIX type port. The Switch can auto
transform to MDI-II or MDI-X type, so you can make a
connection using a standard or crossover cable.
AC Power
The Switch requires AC power supply of 100~240V AC, 50~60
Hz. The Switch does not come with a Power ON/OFF switch, so
the Switch will automatically power on when it is connected to
an electrical outlet. The switch’s power supply will adjust to the
local power source automatically and may be turned on without
having any LAN segment cables connected.