TRENDnet TE100-S1616 User Manual Download Page 7

 

1

 

I

NTRODUCTION

 

This chapter describes the features of the Switch and some 
background information about Ethernet/Fast Ethernet 
switching technology. 

Fast Ethernet Technology 

The growing importance of LANs and the increasing 
complexity of desktop computing applications are fueling the 
need for high performance networks. A number of high-speed 
LAN technologies have been proposed to provide greater 
bandwidth and improve client/server response times.  Among 
them, 100BASE-T (Fast Ethernet) provides a non-disruptive, 
smooth evolution from the current 10BASE-T technology.  
The non-disruptive and smooth evolution nature, and the 
dominating potential market base, virtually guarantee cost 
effective and high performance Fast Ethernet solutions in 
the years to come. 

100Mbps Fast Ethernet is a new standard specified by the 
IEEE 802.3 LAN committee.  It is an extension of the 
10Mbps Ethernet standard with the ability to transmit and 
receive data at 100Mbps, while maintaining the CSMA/CD 
Ethernet protocol. Since the 100Mbps Fast Ethernet is 
compatible with all other 10Mbps Ethernet environments, it 
provides a straightforward upgrade and takes advantage of 
the existing investment in hardware, software, and 
personnel training. 

Summary of Contents for TE100-S1616





























Reviews: