- 7 -
4.
When asked if you want to restart your
computer, click
Yes
.
Installation for Windows NT 4.0
This section describes the installation for Windows
NT under the condition that Windows NT is already
installed in your computer. If your computer is not
yet networking installed, refer to the Windows
documentation for details. Also remember to have
your original Windows NT CD-ROM handy before
you begin the installation. For Windows NT may ask
for it during the installation.
1.
Before you turn on your computer, make sure
the PCMCIA Fast Ethernet Xpress Port PC Card
has been properly inserted into the free
PCMCIA slot of your computer.
2.
Start Windows NT.
3.
Click
Star
t
?
Settings
?
Control Pane
l. Double-
click on the
Network
icon.
4.
When the Network window appears, click on the
Adapters
tab. Click on the
Add
button,
followed by
Have Disk
. Put the driver disk into
drive A.
5.
When asked to supply the path to the disk, type
a:\ and click
OK
.
6.
Windows NT will ask you to supply the I/O
Base, Interrupt, and Memory values for the card.
Good values to start with are 300 (for the I/O
Base) and 5 (for the IRQ).
7.
When you're finished, click
OK
. Windows NT
will copy necessary files to your computer.
