TRENDnet TE100-H16R, User Manual, Page: 14 / 34

Fast Ethernet Stackable Hubs User’s Guide
Unpacking and Setup 8
♦
Module Slots
Used to install module options for 100BASE-FX connection.
♦
Daisy-Chain IN Port
When cascading a set of stackable Fast Ethernet hubs, this port
should be connected to the Daisy-Chain OUT port of the previ-
ous hub in the stack (usually placed immediately above it). A
cascade of four hubs can be created in this way. The first and
last hubs in the stack use only one of the daisy-chain ports,
while the others use both.
♦ Daisy-Chain OUT Port
Works in conjunction with the Daisy-Chain IN Port (see above).
Connect this port to the Daisy-Chain IN Port of the next hub in
the stack (usually placed immediately below it), using the en-
closed daisy-chain cable.
♦
AC Power Connector
For the power cord.