Ethernet Card
forPCI
8
Section 5 Cable Specifications
The Ethernet adapter is equipped with four
RJ-45 connectors, the RJ-45 connector requires a
corrsponding cable. This section describes each
cable's specification.
•
Cable for RJ-45 connector for 10Mbps network
Cable type: UTP with 2
twisted pairs
o f
22, 24 or 26 AWG
Category: 3, 4, or 5
Twists per foot: 2 to 3(min.)
Nominal impedance: 100 ohms
Maximum cable length: 300'(100m)
Maximum Attenuation: 8 to 10 dB per 100m
at
10Mz
•
Cable for RJ-45 connector for 100Mbps network
Cable type: UTP with 2
twisted pairs of
2 6
AWG
Category: 5
Twists per foot: 2 to 3(min.)
Nominal impedance: 100 ohms
M20082217500